【Car】Firmly fixed in the rear seat! 3 types of holders for different installation locations, which one will you choose?

Elecom has released three types of MagSafe compatible smartphone holders. All of them use N52 neodymium magnets, securely holding the smartphone even during vibrations and sudden movements while driving. Which holder do you prefer for different mounting locations?

Attach to the dashboard with velcro! Adhesive Type

First, check out the "MAGKEEP Car Smartphone Holder Adhesive Type." It is a type that attaches to the dashboard in a classic way, allowing for easy removal and attachment of the holder with velcro. The neck part can flexibly change angles, so you can freely adjust the angle of your smartphone.

The holder part has a ball joint design, allowing for a 360° change in smartphone angle. The use of silicone material that is resistant to scratches is also a highly rated point.

Product Name / MAGKEEP Car Smartphone Holder Adhesive Type
Model Number / P-CARS15BK
Price / 5797 yen
Weight / Approximately 125g
Accessories / Velcro sticker, metal sticker
Load Capacity / Approximately 270g (including accessories like cases)
Material / Polycarbonate, ABS, Silicone, TPU (Thermoplastic Polyurethane), Iron, Magnet

Can be folded compactly when not in use! Suction cup type

The "MAGKEEP Car Smartphone Holder Suction Type" powerfully adheres by creating a vacuum when the dial is turned. It can be attached even to shallow textured surfaces, and can be installed anywhere that has a flat and horizontal area with a diameter of 70mm or more. Even if the suction power weakens, it can be revived by rinsing with water.

The holder part can rotate 180° forward and backward, while the base rotates 360°, allowing you to freely change the orientation and angle of your smartphone.

Product Name / MAGKEEP Car Smartphone Holder Suction Type
Model Number / P-CARS16BK
Price / 5467 yen
Weight / Approximately 115g
Accessories / Metal Sticker
Weight Capacity / Approximately 270g (including accessories like cases)
Material / Polycarbonate, TPU (Thermoplastic Polyurethane), Polyurethane, Silicon, Iron, Magnet

Enjoy comfortable video viewing even in the back seat! Back Seat Type

The "MAGKEEP Car Smartphone Holder Back Seat Type" is a rare type designed for use in the back seat, as its name suggests. With a movable two-stage neck, it is possible to adjust the smartphone in all directions. The holder part features a ball joint design, allowing you to change the angle of the smartphone up to 360°.

The arm rotates 180° and can be widely spread, which is great for sharing with friends. You can also get a comfortable environment in the back seat.

Product Name: MAGKEEP Car Smartphone Holder - Rear Seat Type
Model Number: P-CARS17BK
Price: 5797 yen
Weight: Approximately 247g
Accessories: Metal Sticker
Load Capacity: Approximately 270g (including accessories like cases)
Material: Polycarbonate, ABS, Silicon, TPU (Thermoplastic Polyurethane), Iron, Magnet

● Elecom

Search Elecom P-CARS15BK on Amazon