Front is a roll, sides are tight! The combined technique of this sunshade can fully protect your beloved car.

This week, as September approaches, it’s still very hot. The parked car is enveloped in a stuffy heat the moment you open the door. If you want to completely protect your car from the heat, combining “automatic roll type” + “static film” might be a good idea!

Just pull out the front! Cut down the hassle of spreading every time you use it

The set of two automatic roll-type car sunshades "K-SSD07A" and static car sunshade "K-SSD01" seems to support the still hot summer in Japan. By using them together, you can effectively block sunlight from the front windshield and side windows in different ways. It addresses sunlight coming from the front and the sides.

The K-SSD07A for the front is fixed in place with suction cups, allowing the shade to be pulled out in a roll. Once you’re done using it, you can roll it back up, so there’s no need to spread or fold a large shade every time you park.

It stretches from about 70 to 140 cm and accommodates lengths up to 120 cm. The length of the pole and the angle of the suction cup can also be adjusted, making it possible to install it on a wide range of vehicle types, from light cars to regular cars. However, please be careful as there may be some vehicle models that cannot be installed, such as those with sensors on the windshield or those with large protrusions or deep unevenness on the dashboard.

Cuts 99% of UV rays, reducing sunlight on the steering wheel and seats

During parking in midsummer, not only the heat but also the prolonged exposure of sunlight to the dashboard and seats is a concern. To address this, the shade fabric uses 420D oxford, with additional titanium silver coating on the outside. This not only helps with heat prevention but also addresses the deterioration of the interior due to fading and cracking caused by ultraviolet rays.

If you block out sunlight, it can help to reduce the rise in temperature inside the car after parking. During the summer, when you want to shorten the wait for the air conditioning to kick in once you're inside the car, a roll-up type that can be pulled out quickly seems like a strong ally.

The sides are suction cup-free! It's great how it sticks to the window.

"K-SSD01" blocks sunlight coming in from the side. It comes in a set of four pieces: two measuring about 50×30cm and two about 44×36cm. This product uses static electricity to adhere to the window, instead of suction cups or sticky tape. You can install it just by placing it against the window and smoothing it down, and when you want to remove it, you can simply peel it off easily. It's also a plus that it doesn't leave any adhesive residue on the window.

Thanks to the ultra-high density gauze and mesh structure, it blocks 99% of ultraviolet rays as well. One side is mesh, allowing you to see outside while blocking sunlight. When not in use, it can be folded small and stored in the included pouch. If you keep it in the door pocket or glove compartment, you can quickly take it out on days when you're concerned about sunlight.

Suitable not only for parking but also for privacy when sleeping in the car.

Since it can cover the front and sides, it's not just for heat and UV protection. It can make it difficult to see inside the car from the outside, allowing for privacy while parking, and can also be used as a cover during car camping or napping. In case of a disaster, it can also be used to block outside views while spending time in the car.

The front does not need to be unfolded every time; you can pull out the roll, and the sides stick without suction cups. With this appropriately designed sunshade, it seems like it can also block the dreariness of having to deal with light blocking measures during hot seasons.

Product Name: MAXWIN Sunshade for Cars, Front Roll-Up Type, Automatic Retractable, Side Static Film Set
Price: 5328 yen

MAXWIN Automatic Roll-Type Car Sunshade K-SSD07A
Size: Approximately 80×6×3 cm
Stretch Range: Width approximately 70–140 cm, Length up to 120 cm
Weight: Approximately 920 g
Material: 420D Oxford Fabric
Color: Silver on the surface, Black on the back
UV Cut Rate: 99%

MAXWIN Static Car Sunshade K-SSD01
Size: Approximately 50×30 cm×2 pieces, Approximately 44×36 cm×2 pieces
Weight: Approximately 210 g
Material: Mesh, Static Electricity PVC Film
Number of Pieces: 4
UV Cut Rate: 99%
Accessories: Storage Bag

⚫︎ Chang Tong

Search Car sunshade on Amazon