Side Storage Panel for Magnetic Storage! No tools needed & easy clip installation for casual DIY

I have a habit of hanging garbage bags in my car. I want to attach a magnetic hook right away. However, I can't use magnets if the surface is made of resin. IPF's "EXP Magnet Plate" is a supplementary plate that adds a magnetic surface in those places. With the IPF Side Storage Panel, you can simply secure it with a resin clip into the existing square holes. It seems I can hang garbage bags everywhere without any major processing.

A single corner hole transforms into a magnet space

Source: IPF.

An auxiliary plate called "EXP Magnet Plate" designed to be installed on the IPF manufactured side storage panel. The size corresponds to one side of the corner hole made in the panel. By attaching the plate here, it becomes possible to also install magnet products in the places where hooks and belts were previously used.

Source: IPF.

The side storage panel is an item that changes the flexibility of storage depending on how you use the holes. By simply adding the option to "attach with magnets," the number of small item placements seems likely to increase significantly. You can quickly attach magnet-style lights, small containers, holders, and trash bags, and if you want to change the location, you can easily move them again. As the methods of fixing increase, the usability of the panel itself expands greatly.

Just snap it in place with a clip

Source: IPF.

For installation on the IPF side storage panel, use the included plastic clips. Align the plate with the corner hole of the panel and secure it with a clip. No tools are needed. Every time you add something to the storage panel, you can simply snap the plate into place without having to prepare bolts and nuts for tightening, allowing for easy addition at the necessary location.

Source: IPF.

The interior of the vehicle heats up in the summer and cools down in the winter. Additionally, when attaching and detaching magnetic products, the plate side also experiences stress each time. If it's secured mechanically with clips, there’s no need for double-sided tape or anything like that. It’s a small component, but if you’re using it in a vehicle, this fixing method might be the least stressful option.

Magnet-on-space on the resin surface

Source / IPF.

The usage is not limited to only the IPF's side storage panel. If you make mounting holes for resin clips on the resin surface, you can attach the EXP magnet plate. In other words, in interiors where magnets do not originally adhere, you can add a magnetic surface only where needed. However, this requires drilling.

Source / IPF.

When modifying car interiors, it’s important to thoroughly check the installation position, including whether there are wiring or components on the back side. Create a small magnet space only in areas where "a magnet would be nice." This method seems to offer better usability.

When removing, use the principle of leverage OK

Source / IPF.

A little tip for removing magnet products. Instead of pulling straight and hard towards you, use the principle of leverage to detach it. If a force exceeding the load capacity of the resin clip is applied, it will come off the vehicle mounting surface. Sometimes, more force is needed to remove a magnet than to attach it. Just because the plate is securely fixed doesn’t mean you should pull it vigorously; instead, detach it as if peeling it off from the edge. This is one usage method that you definitely want to remember.

Source / IPF.

Rather than a part that increases storage, it is a part that adds a new fastening method called "magnet" to an already existing storage panel. If you’ve ever wished that magnets could be attached while using side storage panels, then there’s no need to hesitate.

Product Name / EXP Magnet Plate
Price / 2200 yen
Model Number / EXR-15P
Contents / 1 piece included
Set Contents / Base Plate, Resin Clip

●IPF

Search EXP Magnet Plate on Amazon