【"0 yen" for electricity costs for security】Protect your car and home! LED light with motion and light sensors

In this somewhat dangerous world, it’s essential to take proper nighttime security measures. Fun Standard's "Solar-Powered Motion Sensor Light" can be easily installed without any construction needed. Moreover, since it's solar-powered, there are no electricity costs!

For nighttime anxiety measures, a solar-powered motion sensor light

is reassuring for home security when coming home at night or when away for long periods. The "Solar-Powered Motion Sensor Light" launched by the brand "Pike's Peak," operated by Fun Standard, offers peace of mind for your home and beloved car.

Since it is equipped with a solar panel, it can be used without being connected to a power source. There are no wires or outlets needed, making it easy to install outdoors.

It is equipped with both a motion sensor and a light sensor. It starts working when it detects movement, but the light only turns on when the surroundings are dark, thanks to the light sensor. Therefore, it is designed to prevent lighting during the day.

The lighting mode can be adjusted using the three modes above. You can choose according to the environment and purpose of use.

The solar panel and sensor light have a separate design. They are connected by a 5m cable, allowing the panel to be placed in a sunny location and the light in a location where illumination is needed.

With an IP65 waterproof and dustproof rating, it is safe to use outdoors. It can be used toughly even in places where direct sunlight, rain, or dust are concerns.

The left image is during the day, and the right image is at night. It lights up automatically at night.

In sunny conditions with sunlight, it can be charged for about 6 to 8 hours and will light up for about 8 to 10 hours. It is designed to ensure that the power generated during the day can support the lighting at night.

It's easy to install, so this could be useful as a security measure for your beloved car.

Product Name: Motion Sensor Light Smart Beam MSL-01
Price: 3980 yen
Main Unit Size: Approximately 28.2×3×11 cm, Panel approximately 14.1×12 cm
Weight: Main unit approximately 305g, Panel approximately 205g
Charging Time: Approximately 6 to 8 hours
Operating Time: Approximately 8 to 10 hours
Solar Panel: 6V/350mA (maximum output 2.1W)
Built-in Battery: Lithium-ion 3.7V/1800mAh
Light Source (LED): 0.2W High Brightness LED Chip/Color Temperature 8000~9000K
Set Includes: Sensor Light x1, Solar Panel x1, Remote Control (includes button battery CR2032) x1, Installation Arm x2, Installation Board x2, Screws x4, Plugs x4, Instruction Manual/Warranty

●Fun Standard

Search Human Detection Sensor Light Smart Beam MSL-01 on Amazon