[Dashcam] No wiring required, just stick it on! With over 1000 hours of vibration monitoring,安心 while parked.

I discovered a drive recorder that completely solves all the troubles of connecting cables and various settings. It's a no-wiring dashcam that is easy to install, yet it comes with a backup power source for added peace of mind!

No wiring required "Dashcam + Dedicated Battery Set"

Source: Makuake.

FlukeForest's "Dashcam + Dedicated Battery Set" is a convenient item that combines a dashcam & backup power supply. By simply placing the dashcam and battery in your car, you can use the dashcam without any wiring.

Source: Makuake.

After the engine stops, the dashcam automatically powers off. However, worries about "hit-and-run, vandalism, or theft..." are not a problem. The backup power supply has a sensitive vibration sensor built-in, so if there is a hit-and-run or similar incident while parked, it automatically activates to record. The battery duration is more than sufficient at 61 hours.

Source: Makuake.

Easy to set up

Source: Makuake.

Connect the dash cam and battery via USB, stick the dash cam to the windshield, and it's done in no time. There's no need to worry about "the wiring work being a hassle."

Source: Makuake.

Since it is a super compact size dashcam, it does not interfere with the wiper area and can also be installed on the back of the rearview mirror.

Source: Makuake.

When you turn the switch ON, the "Continuous Recording" mode activates, recording continuously while driving or parked. When turned OFF, the "Vibration Detection" mode activates. It starts recording only when a vibration is detected and returns to standby mode after 10 minutes.

The image quality is superb

Source: Makuake.

The camera is equipped with 2 million pixels Full HD WDR (Wide Dynamic Range). It creates images with appropriate brightness by brightening dark areas and darkening bright areas. It prevents “white-out” in tunnels and “blackout” during night driving, enabling the recording of clear and reliable images.

Source: Makuake.

It automatically corrects sudden changes in surrounding brightness, providing peace of mind in case of emergency.

2WAY charging method

Source: Makuake.

The AC adapter & car socket cable is included, so you can charge it at home or while driving. To charge at home, insert the USB into the main unit and charge from an outlet; while driving, you can connect it to the vehicle's socket for charging.

Source: Makuake.

Product Name: 1ch Type Simple Drive Recorder + Dedicated Battery Set
Price: 49,800 yen, Special Price: Starting from 36,900 yen
Size: Approximately W86 × D22 × H36mm (excluding lens and bracket)
Weight: Approximately 65g
Camera: 2 million pixels Full HD WDR (Wide Dynamic Range), Diagonal 130°, Horizontal 100°, Vertical 80°
Frame Rate: 27.5fps
Operating Temperature: -10 to 60°C
Accessories: Dedicated cigar power adapter, Cable fixing clamps ×8, SD card (16GB Class10), Instruction manual and warranty

●FlukeForest

Search Drive Recorder on Amazon